An HPE BladeSystem solution starts with either a BladeSystem c7000 or c3000 enclosure.
For the c7000 enclosure, key options include hot-plug power supplies, power input module, hot-plug HPE Active Cool Fans and an optional redundant BladeSystem Onboard Administrator module. Once the enclosure and its key components have been selected, the following components can be added: interconnect modules, HPE ProLiant or Integrity server blades, expansion blades and HPE OneView or Insight Control management software.
A BladeSystem c7000 Enclosure holds up to 16 server blades and up to 8 compute, storage or workstation blades plus redundant network and storage interconnects. It includes a shared, multi-terabit high-speed mid-plane for wire-once connectivity of server blades to network and shared storage. Power is delivered through a pooled power back-plane that ensures the full capacity of the redundant hot-plug power supplies is available to all system components.
Fully populated HP c7000 BladeSystem
Power Cables
Warranty Letter
Processor (CPU): | DUAL (2X) Intel® Xeon® Processor X5650 (12M Cache, 2.66 GHz / 3.06 GHz Turbo, 6.40 GT/s Intel® QPI) |
Memory (RAM): | 64 GB RAM INSTALLED - Up to 384GB, using PC3-10600 DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2 DIMMs per Channel in 12 slotsUp to 48GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at 2 DIMMs per Channel in 12 slots |
Hard Disk Controller: | HP Smart Array P410i Controller (Raid 0,1) |
Hard Disk Configuration: | 2 x 300GB 2.5" 10K SAS Drives - Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives |
Network Ports: | Integrated NC553i Dual Port FlexFabric 10Gb Adapter supporting autosensing 10Gb/1Gb Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI bootOne (1) additional 10/100 server adapter dedicated to iLO 3 Management |
| Two (2) I/O expansion mezzanine slots (x8 PCI Express) |
Compatible Enclosures: | HP C7000 or HP C3000 |
Form Factor: | 10U Rackmount |
Blade Server Bays: | 16 x Normal-Height Blades / 8 x Double-Height Blades |
Power Supply Units: | 6 x Slots - 2250w & 2400w PSU's available - Single Phase and 3-Phase Power Kits |
Management Modules: | 2x HP Onboard Admin Module (407296-001/414055-001) - 2 x OnBoard Administrator Bays |
Interconnect Modules: | 2x Cisco Catalyst Blade Switch 3020 for HP (WS-CBS3020-HPQ) - 8 x Interconnect Bays |
Fans: | 10 x Hot-Swap Fan Bays |
| 44.7 x 81.3 x 44.25 cm |